The Meter Structure; Lcd Display; Display Symbols - Egatronic 51248 Manual De Instrucciones

1. Hand Guards: to protect user's hand from touching the dangerous
area.
2. Trigger: press the lever to open the transformer jaws. When the
pressure on the lever is released, the jaws will close.
3. Functional Buttons
4. Input Terminals

5. LCD Display

6. Rotary Switch
7. Transformer Jaw: designed to pick up the AC and DC current flowing
through the conductor. It could transfer current to voltage. The tested
conductor must vertically go through the Jaw center.
1. Test of diode.
2. The continuity buzzer is on.
3. Indicator for zeroing.
4. Data hold is active.
5. The Meter is in the auto range mode in which the Meter automatically selects the range with
the best resolution.
6. True RMS indicator.
7. Indicator for AC voltage or current.
8. Indicates negative reading.
9. Indicator for DC voltage.
Deficiency of Built-In Battery
Danger of High Voltage
Conforms to Standards of European Union
THE METER STRUCTURE (see figure 1)
DISPLAY SYMBOLS (see figure 2)
14 15 16 17 18
figure 2
Continuity Test
Diode
AC or DC
figure 1
21