Canon EOS 6D Mark II Manual De Instrucciones página 64

d Operating the Camera with Touch Screen
3 Setting the Touch Control Response
Cautions for Touch Control Operations
Since the LCD monitor is not pressure sensitive, do not use any sharp
objects, such as your fingernail or a ballpoint pen, for touch operations.
Do not use wet fingers for touch operations.
If the LCD monitor has any moisture or if your fingers are wet, the touch
screen may not respond or malfunction may occur. In such a case, turn
off the power and wipe off the moisture with a cloth.
Attaching any commercially-available protective sheet or sticker on the
LCD monitor may degrade the touch operation response.
If you quickly perform touch operation when [Sensitive] is set, the touch
operation response may be poor.
62
Select [Touch control].
1
Under the [54] tab, select [Touch
control], then press <0>.
Set the touch control response
2
setting.
Select the desired setting, then press
<0>.
[Standard] is the normal setting.
[Sensitive] provides a more reactive
touch screen response than
[Standard]. Try using both settings
and select the one you prefer.
To disable touch operations, select
[Disable].