Blackstar Amplification S1-104EL34 Manual De Instrucciones página 14

Crunch DPR Operation
The DPR control allows you to pin-point exactly how much valve overdrive you want
to come from the preamplifier section and how much is coming from the valves in
the power amplifier section.
Channel Channel Channel
Gain Volume
Crunch Low/Mid Mid
Crunch Mid High
Crunch High Mid
Overdrive DPR Operation
The DPR control allows you to add power amplifier compression to your high gain
lead and rhythm tones. This is superb for encouraging really fluid lead playing rich in
power amplifier sustain and feel.
Channel Channel Channel
Gain Volume
Overdrive Mid Mid
Overdrive High Mid
32. Power Indicator Light
The power indicator will light when the amplifier is switched on.
33. Standby
This switch enables the output stage. Always turn this switch on at least 30 seconds
after the Power switch (34). During short breaks in playing use just this switch to turn
'off' and 'on' the amplifier's output.
34. Power
This switch is used to turn the amplifier on and off. You should always turn this
switch on before turning on the Standby switch (33).
Master DPR Description/
Volume Sound Character
Mid High Lower gain settings provide a dynamic
crunch utilising the full 100W of available
headroom.
High Mid At these settings there is a blend of the
distortion and compression generated in the
preamplifier and power amplifier valves. We
recommend that youexperiment to find your
'sweet-spot'.
Mid Low Here maximum preamplifier gain is
combined with the lowest power amplifier
output for maximum valve saturation.
Master DPR Description/
Volume Sound Character
Mid High The maximum headroom from the 100W
power amplifier will yield incredibly tight
and dynamic overdrive at extreme volume
settings.
Mid Low With maximum overdrive gain there is loads
of sustain from the preamplifier which is
augmented by the increased power amplifier
compression as the DPR is set to minimum.
Again, we recommend that you experiment
to find your 'sweet-spot'.
13