Front Panel - Blackstar Amplification S1-104EL34 Manual De Instrucciones

Front Panel

1. Input
Plug your guitar in here. Always use a good quality screened guitar lead.
Clean Channel
2. Clean Indicator
When the green LED is on the Clean Channel is selected.
3. Clean Select
Press this switch to select the Clean Channel.
4. Clean Gain
The Clean Gain control adjusts the amount of the Clean Channel's overdrive or
distortion. Low settings, counter clockwise, will deliver a clean sound. As the Clean
Gain control is increased clockwise the sound will begin to break-up, delivering a
subtle overdrive.
5. Bright / Warm Switch
The Bright / Warm Switch reconfigures both preamplifier and power amplifier circuits
to deliver Class A or Class AB style tones.
The table below describes the operation of the two modes:
Mode Preamp Character
Bright Tighter bass, chiming mids
and highs
Warm Looser bass, glassy highs
6. Clean Volume
This controls the volume of the Clean Channel. Turning it clockwise increases the
volume.
Crunch Channel
7. Crunch Indicator
When the yellow LED is on the Crunch Channel is selected.
8
Power Amp Damping
Low (greater emphasis on
lows and highs)
Medium (tighter bottom-
end for crunch)
Use For
Ringing clean and jangly
rhythm
Warm cleans and crunchy
rhythms