Manual Time Setting - TFA Dostmann FOCUS Manual De Instrucciones

Note:
If the time reception function is turned OFF manually, the clock will not attempt any reception of the
DCF time as long as the time reception OFF function is activated. The Time Reception icon will not
be displayed on the LCD.
12/24 HOUR TIME DISPLAY SETTING
After setting time reception ON/OFF, press the SET key, "12h" or "24h" flashes in the LCD.
1.
Press the IN key to select the "12h" or "24h" display mode.
2.
Press the SET again to confirm and to enter the "Manual Time setting" or exit the setting mode by
3.
pressing the CH key
Note: When 24h mode display is selected, the calendar format will be date and month display.
When 12h mode display is selected, the calendar format will be month and date display.

MANUAL TIME SETTING

Hours (flashing)
In case the weather station is not able to detect the DCF-signal (disturbances, transmitting distance, etc.),
the time can be manually set. The clock will then work as a normal Quartz clock.
To set the clock:
1. The hour and minutes digits start flashing in the time display section.
Flashing
Minutes (flashing)
42