After setting time reception ON/OFF, press the SET button, "12h" or "24h" flashes in
1.
the LCD. (default 24 h)
Press the CH/ + button to select the "12h" or "24h" display mode.
2.
Press the SET again to confirm and to enter the "Manual time setting" or exit the
3.
setting mode by pressing the SNOOZE/ SUN button.
Note: When 24h mode display is selected, the calendar format will be date and month
display. When 12h mode display is selected, the calendar format will be month and
date display.
MANUAL TIME SETTING
In case the weather station is not able to detect the DCF-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal
quartzclock.
Hours (flashing)
1.
The hour and minute digits start flashing in the time display section.
2.
Use the CH/ + button to adjust the hours and then press SET button to go to the
minute setting.
Minutes (flashing)
64