Technical Data; Intended Use - Allett Liberty Classic 30 cm Instrucciones De Funcionamiento

F016J11384-A

Technical data

Designation:
Cylinder lawnmower
Part number
Rated power
Voltage (Max V)
Blade width (cm)
Height of cut (mm)
Grassbox capacity (l)
Self-propelled
Rake option
Weight (kg)
Protection class
Serial number

Intended use

This product is intended for domestic lawnmowing.
Introduction
This manual gives instructions on the correct assembly and safe use of your machine. It
is important that you read these instructions carefully. When fully assembled, the machine
is greater than 20kg in weight. If necessary, obtain assistance to remove from it from the
packaging. Lift the mower by the cartridge carry handle and the lower handle bar. Take care
if carrying the mower to the lawn as the blades are sharp.
Delivered items
Lawnmower with handle assembly
Grass box
Grass box cradle
Operating instructions
Easy start sheet
Product registration card
Allen key
Spanner
2 x Cable clips
(2 x Auxiliary plastic wheels & stub axles - 43cm model only)
Assembly
Please refer to the earlier illustrations (A) – (D).
Top handle
(A) Unfold the top handle and secure in place with the cam lock lever (Liberty 35 & 43
models) or the wing nut (Liberty 30). Make sure you do not to trap any cables between the
handle bars.
Top handle height adjustment
(B) The top handle has a set of holes at the pivot to give height adjustment, select the
corresponding hole to give the height you are most comfortable with.
Original instructions
Liberty 30 Liberty 35
LIBE30 LIBE35
400W@10A 400W@10A
40V Li-ion 40V Li-ion
30 35
6-32 6-32
32 32
O (Push)
P
O O
23.0 26.5
III III
See rating plate on machine
Liberty 43
LIBE43
400W@10A
40V Li-ion
43
6-32
62
P
P
38.5
III
11