Allett Liberty Classic 30 cm Instrucciones De Funcionamiento página 19

F016J11384-A
Fault finding . . .
Symptom
Machine labours or belt squeals
Cutting blade not rotating
Land drive does not engage
(Liberty 35/43)
Excessive vibration/noise
Poor collection
Motor stops during use
Service
Useful videos are available on Youtube, search for "Allett Mowers" to find our channel.
To locate your nearest Allett dealer/service agent go to: www.allett.co.uk/allett-dealer-locator
Disposal
Product, accessories and packaging should be sorted for environment-friendly recycling.
The plastic components are labelled for categorised recycling.
Do not dispose of electrical power tools, batteries or chargers into household waste!
According to the European Directive 2002/96/EC on waste electrical and electronic
equipment and 2006/66/EC on waste batteries it is EU law that power tools which are
no longer suitable for use must be separately collected and sent for recovery in an
environmentally-friendly manner.
The following toxic and corrosive materials are in the batteries used with this lawnmower:
Li-ion - Toxic
When disposing of damaged or end of life batteries cover the battery terminals with heavy
duty adhesive tape to avoid; injury, risk of fire, explosion or electric shock.
All toxic materials must be disposed of in a specific manner to prevent contamination of
the environment. Before disposing of damaged or worn out Lithium ion battery packs,
contact your local waste disposal agency, or the local Environmental Protection Agency for
information and specific instructions. Take the batteries to a local recycling and/or disposal
centre, certified for Li-ion disposal.
Original instructions
continued
Possible cause
Height of cut too low
Blades adjusted too tight
Cutting blade obstructed
Blades too tight
Cutting blade damaged
Belt/gears slipping or damaged
Incorrect cable adjustment
Cable damage
Unrestrained cable
Cutting blade damaged
Cutting blades not adjusted evenly
Gears have failed to protect blades
from damage
Mowing in wet conditions
Belt slipping
Motor speed too fast/slow
Motor protection circuit has activated
Remedy
Increase height of cut
Adjust blades
Clear obstruction
Slacken off blade adjuster screws
Contact service agent
Contact service agent
Adjust cable
Contact service agent
Clip cable to handle bars
Contact service agent
Adjust blades
Contact service agent
Allow grass to dry, use faster speed
Tension belt
Increase/decrease motor speed
Allow motor to cool down for 1 hour,
raise height of cut or slacken blade
19