Transferring Measurements - Beurer BC 85 Instrucciones De Uso

• Press and hold the memory button M1 or M2 for 5 seconds
(depending on the user memory you are in).
• The selected value is deleted. The device briefly displays CL
00.
• If you would like to delete other values, repeat the process
described above.
You can switch off the device at any time by pressing the
START/STOP button .

8. Transferring measurements

Transfers using the USB interface
Connect the blood pressure monitor to your PC using the USB
cable.
No data transfer may be launched whilst performing a
measurement.
PC is shown on the display. Begin the data
transfer in the "beurer HealthManager" PC
software. During the data transfer, an anima-
tion is shown on the display. A successful data
transfer is displayed as in figure 1. If the data
transfer is unsuccessful, an error message
appears as in figure 2. In this case, interrupt
the PC connection and start the data transfer
again.
After 30 seconds of not being in use or if
communication with the PC is interrupted,
the blood pressure monitor switches itself off
automatically.
Transfer via Bluetooth
It is also possible to transfer the measured values saved on
the device to your smartphone using Bluetooth
You will need the "beurer Health Manager" app for this. This
is available in the Apple App Store and from Google Play.
Proceed as follows to transfer values:
If Bluetooth
transferred automatically after the measurement. The
bol appears in the top left of the display (see chapter 4 "Pre-
paring the measurement").
figure 1
figure 2
29
®
®
is activated in the settings menu, the data is
Step 1: BC 85
®
Activate Bluetooth on your device (see chapter
4 "Preparing the measurement, Bluetooth
Step 2: "beurer HealthManager" app
In the "beurer HealthManager" app, add the
BC 85 under "Settings/My devices".
Step 3: BC 85
take a measurement.
®
.
sym-
®
").