Maintenance And Service - Bosch GPLL5 Instrucciones De Funcionamiento

For all four fastening methods, pay attention that the wall holder 1 is
fastened securely to the structural surface. Faulty measurements can
result when the wall holder slips away.
Attach the tool via the magnets 14 onto the metal plate 3 of the wall
holder 1.
Belt Clip
With the belt clip 5, the tool, as an example, can be hooked to a belt
and is always at hand.

Maintenance and Service

• Check the tool each time before using. In case of visible
damage or loose components in the interior of the tool, the
safe function is no longer ensured.
Keep the tool clean and dry at all times to ensure proper and
safe working.
Do not immerse the tool into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
If the tool should fail despite the care taken in manufacturing
and testing procedures, repair should be carried out by an
authorized after- sales service center for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the tool.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries instead of disposing of
waste. The unit, accessories, packaging & used batteries
should be sorted for environmentally friendly recycling in
accordance with the latest regulations.
-13-