Scope Of Delivery; Proper Use; Technical Description - Waeco PerfectBattery BC100 Instrucciones De Uso

PerfectBattery BC100, BC200
3

Scope of delivery

Item
in fig. 1, page 3
1
2
4

Proper use

The battery conditioner is suitable for the following uses:
 Charging device for lead batteries with a capacity of between 10 Ah and
30 Ah.
– MBCC-100: 12 V battery
– MBCC-200: 6 V battery
 Conditioning: cyclical charging and discharging subjects the battery to a
constant forming process.
 Back-up power supply: when changing the starter battery, all volatile
memories (on-board computer, vehicle clock, radio code, etc.) lose the
data stored. The battery conditioner can keep these volatile memories
supplied with a voltage. The stored data is then retained.
5

Technical description

If the battery conditioner is connected properly, the battery starts either
charging or discharging, depending on its charging status.
During the charging phase, the battery is supplied with a constant charging
current until the final charging voltage has been attained. In the subsequent
charging phase, the charging current decreases as the charging status of the
battery increases.
When the battery is fully charged, the device switches to the discharge
phase. As the discharge current is only approx. 50 mA, this process can last
many times longer than the charging process, depending on the battery
capacity.
When the lowest charging voltage has been reached, the charging process
is started automatically.
EN
Meaning
Battery conditioner
Adapter cable with battery terminals
Scope of delivery
19