Operating And Display Elements; Operation; Before Initial Use - Waeco CoolFreeze CDF16 Instrucciones De Uso

Operation

5.1

Operating and display elements

fig. 2, page 3
Item Description
1 ON
OFF button
2 POWER
3 ERROR
4 SET
5 –
6 UP +
7 DOWN –
6 Operation
6.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 29).
24
Explanation
Switches the cooler on or off when the button is
pressed for between one and two seconds
Status indication
LED lights up green:
LED lights up orange:
LED flashes orange:
LED flashes red:
Selects the input mode
– Temperature setting
– Celsius or Fahrenheit display
– Set battery monitor
Display, shows the information
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature
unit (°C or °F).
Press once to increase the value
Press once to decrease the value
CoolFreeze CDF16
Compressor is on
Compressor is off
Display switched off auto-
matically due to low battery
voltage
Device is switched on but
not ready for operation
EN