Luvion Platinum Manual De Instrucciones página 21

Functionbuttons front- and backside reciever
1 Power/Audio Level LEDs – The green LED indicates the receiver
power is ON or OFF. The red LEDs indicate the audio levels (low to high).
2 LCD Screen – Displays video from the camera.
3 Scan Button - When the SCAN button is pressed, the LCD screen is
turned off and the system continuously scans all available cameras
while the monitor is dark. The scan feature can be used for the fol-
lowing two reasons: (1) to prevent the user from being disturbed
(i.e. when sleeping) by the bright LCD screen, or (2) to save battery
power. If audio is detected above the preset audio trigger level on
the camera(s), the receiver will beep and display the triggered cam-
era. The receiver will return to scan mode about 5 seconds after the
alarm has completed. Press any button (except OK button) on the
front panel of the monitor to exit scan mode.
4 MENU Button – Press to access the receiver menu. Press the button again to exit.
5 Navigation Controls/OK Button – Use the controls in Viewing Mode and
Menu Mode.
6 Stand – Flip the stand out to place the receiver on a fl at surface (such as a
table or countertop). Alternatively, place the receiver in the receiver cradle.
7 Pair Button - Press the Pair button when pairing the receiver with a camera
(more pairing at the pairing chapter)
8 Speaker - Produces the sound transmitted from the cameras.
platinum user manual ALL .indd 21
8
1
2
3
4
5
6
7
EN
21
4-11-2009 17:17:40