Luvion Platinum Manual De Instrucciones página 25

Connecting wireless camera adapter
The camera can be powered either by using the provided power adaptor , or using
batteries (requires 4 AA type batteries, not included). NOTE: Wireless cameras
require a power source (either an electrical outlet or battery power) to operate.
If you plan to permanently mount the camera in a location, it is recommended to
use the included camera power adaptor to prevent interruptions in the image, as
using battery power is intended as a temporary power solution.
Power adaptor
Connect the power adaptor to the camera. Make sure the power adaptor is placed
into a grounded outlet or surge bar to protect the camera from power fluctuations.
Battery
1 Remove the battery cover of the base of the camera.
2 Insert 4 AA batteries (not included) into the Battery Pack. Make sure to cor-
rectly line up the Positive (+) and negative (-) terminals of the batteries.
3 Place the battery pack cover back on.
NOTE: If the camera is plugged in with the AC adaptor, the batteries will not be
used. The batteries are intended for short term, portable camera use only.
platinum user manual ALL .indd 25
Connecting the power adapter to the
9V input on the back of the camera.
EN
25
4-11-2009 17:17:41