Intended Use; Items Supplied; Appliance Description; Technical Data - Lervia KH 4412 Instrucciones De Uso

LAMINATOR KH 4412

1. Intended use

The laminator is intended exclusively for use in private
households, for the hot and cold lamination of docu-
ments made from paper or cardboard .
It is NOT intended for use with any other materials.
It is also NOT intended for commercial or industrial
applications.
No warranty is provided for damages resulting from
improper use of the appliance!

2. Items supplied

1x Laminator Lervia KH 4412
10x Laminating pouches DIN A4 for
hot laminating (80 micron)
10x Laminating pouches DIN A5 for
hot laminating (80 micron)
10x Laminating pouches for hot lamination
of business (80 micron)
1 x Operating Instructions

3. Appliance description

q
Pouch guide (rear)
w
Pouch format restraint
e ON / OFF switch
r
Selector switch for hot and cold lamination
(HOT and COLD)
t
ON / OFF Indicator lamp
y
Indicator lamp "Ready"
u Pouch ejector slot (front)
i Anti-Blocking switch and pouch thickness switch
o
Slot for manual pouch input

4. Technical data

Power supply:
Power consumption:
Power consumption:
Laminating speed:
Foil size
A4 approx. 45 Sec.
A5 approx. 35 Sec.
Lamination thickness:
Foil width:
Pouch thickness:
Hot lamination:
Cold lamination:
Protection class:

5. Safety instructions

• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that they
do not play with the appliance..
• Unplug the power cable after every use and be-
fore cleaning, so as to prevent the appliance from
being switched on inadvertently.
• Check the appliance and all components for
visible damages. The safety concept can only
work if the appliance is in a fault-free condition.
• Never perform hot lamination on flammable,
heat-sensitive and/or meltable materials and do
not laminate drawings on temperature-sensitive
paper or material that will undergo changes in
colour or quality when subjected to heat.
- 18 -
220 - 240 V ~ 50 Hz
1,4 A
300 W
80 Micron 125 Micron
approx.
55 Sec.
approx.
40 Sec.
max. 1 mm (cold lamination)
Max. 230 mm
max. 125 Micron
max. 200 Micron
II