Anti-Blocking Function (Abs); Cleaning And Care - Lervia KH 4412 Instrucciones De Uso

Ensure there is at least 30 cm of open
space in front of the laminator. If you do
not, the laminating pouch will not be
completely ejected from the laminator
after lamination. This could damage the
laminated pouch.
The laminated pouch is ejected from the pouch
u
ejector slot of the laminator.
Only after hot lamination: When the lami-
nated pouch is ejected from the pouch
ejector slot u of the laminator it is still hot
and its shape may change slightly. For this
reason, allow the laminated pouch to cool
down for at least one minute before
touching it.
To improve the lamination result, you can
weigh down the still hot laminated pouch
with a book, a file folder or any other hea-
vy, flat object. This helps achieves a flat,
flawless surface.
11. Anti-Blocking Function
(ABS)
At the start of the lamination process, the pouch
may be pulled in at an angle or jam itself inside the
appliance.
Slide the Anti-Blocking switch (ABS)
position ABS.
• The laminate pouch is not pulled any further in.
Remove the laminate pouch.
Slide the Anti-Blocking switch (ABS)
the desired foil thickness.
Re-start the lamination process.

12. Cleaning and care

Life-threatening risk of electrical shock:
• NEVER open the housing. There are no
user serviceable components inside.
• NEVER immerse the appliance components
into water or other liquids!
Cleaning the housing:
Clean the surface of the housing with a
slightly noistened dish cloth.
First remove the power plug.
Allow the appliance to cool down completely.
Ensure that no moisture can permeate into the
appliance.
Cleaning the interior of the appliance:
With every lamination, contaminants are deposited
on the rollers inside the laminator. Over time, this re-
duces the performance of the laminator. You should
therefore clean the rollers inside the laminator after
use.
Prepare the appliance as described in chapter
8 "Preparing for hot lamination", up to the
point where the green LED indicator lamp
"Ready"
i
to the Then run a sheet of DIN A4 paper folded in the
middle (maximum thickness 1.0 mm) ...
• without a laminating pouch and
i
back to • with the fold first
... slowly into the slot for manual pouch input
- 22 -
y
glows.
o .