Installation Instructions
Remove oven from packing
Remove all packing materials and accessories from the oven cavity.
Check whether the following parts are in good condition:
- door and hinges;
- front of the oven;
- inside and outside of oven.
Should you find any faults DO NOT USE THE OVEN, and contact your dealer.
Place the oven on a flat stable surface able to support its weight.
To allow efficient cooling of the apparatus, it is recommended to:
- Leave a free space of 20 cm above the upper part of the microwave oven.
- If it is preferred to install the microwave oven in fitted kitchen furniture, observe the fitting
instructions of the fitting frame, which is sold separately, respecting the opening in the upper part
of the unit.
- When installing the microwave oven great care should be taken to ensure that the mains power cable
cannot come into contact with metal steam outlet since the high temperatures involved could cause
damage.
The oven should be kept away from heat and vapour sources (electric oven, toasters, etc.).
The oven has been supplied with a mono-phase power supply cord. The appliance must be earthed.
The manufacturers and dealers are not responsible for any breakdowns or personal accidents should
these installation instructions not be followed by the purchaser.
WARNING: THIS APPLIANCE MUST BE EARTHED.
3