Features; Assembly - RIDGID R3205 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Blade Diameter ......................................................7-1/4 in.
Blade Arbor .............................................................. 5/8 in.
Cutting Depth at 0° ................................................2-3/8 in.
Cutting Depth at 45° ..............................................1-3/4 in.
KNOW YOUR CIRCULAR SAW
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DUST CHUTE
To direct saw dust and chips away from the operator, a dust
chute is located on the rear of the upper blade guard.
FRONT AND REAR KERF INDICATORS
The front kerf indicator aides in following the line of cut
when cutting the workpiece. The rear kerf indicator aids in
aligning plunge cuts and following the kerf when exiting the
workpiece.

ASSEMBLY

UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may
have been improperly assembled could result in
serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
Cutting Depth at 56° ..............................................1-3/8 in.
No Load Speed .................................... 5,800 r/min. (RPM)
Input ................................120 V, 60 Hz, AC only, 15 Amps
HEX GRIP
Rear handle with hex grip overmold improves comfort and
grip.
HEX KEY STORAGE
Hex key storage is located on the saw handle.
INDEXING LEVERS
The indexing levers on the saw can be repositioned to suit
user preference.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turn-
ing the blade screw.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
7 — English