Omnitronic CDP-500 Manual Del Usuario página 21

Via the Jog-wheel, you can slowly search within a title forwards and backwards. In this way, you can easily
find a Cue-point for example.Turn the Jog-wheel to the right in order to search forwards and turn it to the left
in order to search backwards. The faster you turn the Jog -wheel the higher the searching-speed.
Pause-mode:
7. TRACK-BUTTONS
Via the Track-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting
a track via the Track-buttons.
8. CUE-BUTTON
Pause-mode:
In the pause-mode, you can cue by pressing and holding the Cue-button. As soon as you let the Cue-button
loose, the player returns to the track-start or the Cue-point.
Playback-mode:
If you press the Cue-button during playback, the player returns to the track-start or the Cue-point and goes
into Pause-mode.
Please refer to the explanations under 6.8 Cueing.
9. PLAY/PAUSE-BUTTON
With the Play/Pause-button, you can start the playback and stop it again. Please refer to the explanations
under 6.4 Play/Pause.
10. LOOP ON-BUTTON
With the Loop On-button, you can activate the Loop-function. In this way, you can memorize a sequence
within a track which will be repeated then. Please refer to the explanations under 6.9 Memorizing a
sequence.
11. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by +/- 16 %. Furthermore, you
can synchronize the bass-beat of two different signal-sources with these buttons. Please refer to 6.6
Synchronisation of the playback-speed.
12. PITCH SELECT-BUTTON
You can select the speed-adjusting range between +/- 8 %, +/- 12 % or +/- 16 % by pressing and holding the
Pitch Select-button and selecting the desired range.
13. PITCHFADER
You can adjust the desired speed with the Pitchfader after pressing the Pitch-button. The display shows the
current percentage. If the Pitch-button is not pressed, any adjustment on the Pitchfader will have no effect.
14. TIME-BUTTON
The display can be switched from track remain time (Remain) to track playback time (Elapsed).
During playback of a track or a program, the display shows the track remain time (Remain).
Press this button once and the display shows the track playback time (Elapsed).
15. SINGLE-BUTTON
For choosing single playback or continous play. By pressing this button once, the display shows „SINGLE".
The current track is then played once and the player goes into Pause-mode at the track-start.
16. PROGRAM-BUTTON
With the Program-button, up to 20 tracks can be programmed. Please refer to the explanations under 6.7
Programming.
17. RELAY-BUTTON
By pressing the RELAY-button, the playback automatically switches to the other player after every track.
Please refer to 6.10 Relay-operation.
18. MAIN TEMPO-BUTTON
With the MAIN TEMPO-button, you can adjust the pitch of an adjusted playback speed. Press the MAIN
TEMPO-button in order to adjust the pitch.
21