Settings In The Menu; Operating The Menu - Mettler Toledo ICS226 Instrucciones De Manejo

30232252A ICS226

4 Settings in the menu

The menu consists of the following 6 main blocks which contain various submenus on
several levels:
F1 – Scale menu
F2 – Application menu
F3 – Terminal menu
F4 – Communication menu
F5 – Maintenance menu
End – Exit menu
4.1

Operating the menu

The menu has 2 different operating levels: operator and supervisor. The operator level
provides access to the F2, F3 and F4 menus only. In the supervisor level, all menus are
accessible.
4.1.1 Calling up the menu and entering the password
➜ Press and hold
Operator level password
Supervisor level password
If F1.1 = OIML or NTEP is set:
The following settings are NOT accessible : F1.1, F1.2, F1.3, F1.4, F1.7, F2.1 and F4.3.
4.1.2 Entering numeric values
1. Press to edit the displayed value.
2. Increase the displayed value using the
3. When entering multi-digit values, use the
the left.
4. Repeat steps 2 and 3, if necessary.
5. When all values are entered, use the
until PSD is displayed to prompt the user for a password.
key.
key to move the cursor one position to
key to confirm the changes.
11
Settings in the menu