Notes On Battery Operation - Mettler Toledo ICS226 Instrucciones De Manejo

30232252A ICS226
3.5.2 Setting target weight
There are two ways to set new target values.
If F2.2.2 = MANUAL is set in the operator menu:
1. Press and hold
2. Enter the new target weight.
– Use to move the cursor one position to the left.
– Use to increase the displayed digit.
3. Press to save the new target weight.
– or –
➜ Press to discard changes and quit.
If F2.2.2 = WEIGHT is set in the operator menu:
1. Press and hold
2. Place the target weight on the scale.
3. Press to save the new target weight.
– or –
➜ Press to discard changes and quit.

3.6 Notes on battery operation

ICS226 provides a Ni-MH rechargeable battery as an option, which allows continuous
work for 90 hours without backlight.
The indicator provides information on the state of the battery:
• indicator is displayed => Battery operation.
• indicator is not displayed => Power adapter operation, the battery is being charged.
• indicator blinks => The battery is almost flat and has to be charged immediately.
➜ Connect the power adapter to the scale and power on the scale.
The indicator blinks, the battery is being charged.
Take the following measures to increase battery life:
• Shorten the backlight time (F3.1).
• Shorten the auto power-off/sleep time (F3.2).
until the last target weight value is displayed and blinks.
until the current weight value is displayed and blinks.
9
Operation