How to use
Remote control display
OFF / ON
TIMER/CLOCK
MODE
UP
SELECT
OFF/ON
DOWN
SET
CLOCK
CANCEL
Press and hold
for approximately
10 seconds to show
temperature setting
in °C or °F.
Not applicable
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Information
Information for Users on Collection and Disposal of Old Equipment
These symbols on the products, packaging, and/or accompanying documents mean that used electrical
and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection
points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
6
FAN SPEED
MODE
QUIET/
TEMP
AIR SWING
POWERFUL
AC
RC
CHECK
RESET
Press to restore the
remote control to
previous setting.
Not used in normal
operations.
MODE
To select operation mode
AUTO - For your convenience
• Unit selects operation mode every 10 minutes
according to setting temperature and room
temperature.
HEAT - To enjoy warm air
• Unit takes a while to warm up.
COOL - To enjoy cool air
• Use curtains to screen off sunlight and outdoor
heat to reduce power consumption during COOL
mode.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To switch between
QUIET/
POWERFUL
quiet & powerful
QUIET
POWERFUL
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
POWERFUL: To reach temperature quickly
• This operation stops automatically after
Single
20 minutes.
• Press the button again or turn OFF the
Multi
unit to stop this operation.
Can be activated in all modes and can be
cancelled by pressing the respective button again.
Single split system
Single
Multi split system
Multi
NORMAL