Maintenance; Warranty - SPARKY Professional X 160E Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
extend / shorten the lower part of the screw (a) point-
ing downwards.
USING THE TEMPLATE GUIDE
The template guide can be used for:
▪ Duplicates of complex shape profiles.
▪ Decorative elements with the help of templates.
▪ Repetitive cutting profiles.
If you wish to make your own templates it is best to use
hardwood such as plywood. Use a piece that is slightly
thicker than the depth of the template guide. Deduct the
thickness of the template guide from the thickness of the
template to achieve the required size of the workpiece.
1. To attach the template guide (16) turn the router
upside down and remove the two fixing screws in the
base center.
2. Insert the template guide into the base of the router
and secure it using the two fixing screws supplied
with the machine (Fig. 19).
(Fig. 20: 1–Workpiece; 2–Template; 3–collet nut;
4–Template guide; 5–Router base).
DUST EXTRACTION
Connecting the router to a vacuum cleaner allows effi-
cient dust removal during operation.
Place the dust extraction adapter (14) into the opening
in the router body. Connect a vacuum cleaner to the
adapter. (Fig. 21)
ACCESSORIES TO BE USED WITH THIS
POWER TOOL
HSS router bits with shank diameter Ø6, Ø8 and
Ø12.
Carbide tipped bits with shank diameter Ø6, Ø8 and
Ø12.
Use only router bits with cutting head maximum diameter,
corresponding to the admissible cutting edge peripheral
speed 45 m/s.

Maintenance

WARNING: Always ensure that the tool is
switched off and unplugged before attempting to per-
form inspection or maintenance.
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
Re-lubricate all moving parts at regular intervals.
BRUSH REPLACEMENT
When the carbon brushes are worn out, both brushes
must be replaced simultaneously with genuine brushes
at SPARKY service centre for warranty and post-war-
ranty service.
CLEANING
For safe operation always keep the machine and its ven-
tilation slots clean.
8
EN
Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the switch-
es. Use a soft brush to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
WARNING: Water must never come into con-
tact with the tool.
IMPORTANT! To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
certified service centres or other qualified service or-
ganisations, always using genuine replacement parts.

Warranty

The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee.
Faults due to defective materials implemented as well as
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
X 160E

Publicidad

Tabla de contenido
loading

Tabla de contenido