Sony HANDYCAM HDR-GW77 Manual Del Usuario página 42

When using Windows 7: The Device Stage

window opens.
When using Windows XP/Windows Vista:

The AutoPlay wizard is displayed.
3
On Windows 7, select
[PlayMemories Home] on
the Device Stage window.
On Windows XP/Windows
Vista, select [Computer] (on
Windows XP, [My Computer]) 
[PMHOME]  [PMHOME.EXE].
4
Follow the instructions that
appear on the computer screen
to continue the installation.
When the installation completes,
"PlayMemories Home" starts up.
If the "PlayMemories Home" software

is already installed on your computer,
register your camcorder with the
"PlayMemories Home" software. Functions
that can be used with this camcorder will
then be available.
If the "PMB (Picture Motion Browser)"

software is installed on your computer, it
will be overwritten by the "PlayMemories
Home" software. In this case, you cannot
use some functions that were available
with "PMB" with this "PlayMemories
Home" software.
Instructions for installing the "Expanded

Feature" upgrade appear on the computer
display. Follow the instructions and install
the expansion files.
The computer has to be connected to the

Internet to install the "Expanded Feature"
upgrade. If you did not install the file the
first time you started the "PlayMemories
Home" software, the instructions appear
again when you select a function of the
software that can be used only when the
"Expanded Feature" upgrade has been
installed.
US

For details on "PlayMemories Home, "

select "PlayMemories Home Help
Guide" on the software or visit the
PlayMemories Home support page (http://
www.sony.co.jp/pmh-se/).
Notes
Make sure to set [USB LUN Setting] to [Multi]

when you install the "PlayMemories Home"
software.
If the "Device Stage" does not start up when

you are using Windows 7, click [Start] 
[Computer], then double click the camera icon
for this camcorder  the Storage media icon
 [PMHOME.EXE].
Operation is not guaranteed if you read or write

video data from or to the camcorder using
software other than the built-in "PlayMemories
Home" software. For the information on the
compatibility of the software you are using,
consult the manufacturer of the software.
There may be some types of discs or media

devices on which movies cannot be saved,
depending on the [
selected when you record the movie (p. 34).
Movies recorded with [
[60p Quality ] or [Highest Quality
be saved on Blu-ray discs only.
To disconnect your camcorder from
the computer
1 Click the icon at the bottom right of
the desktop of the computer  [Safely
remove USB Mass Storage Device].
 [Yes] on the camcorder
2 Select
screen.
REC Mode] setting
REC Mode] set to
] can