Charge the battery
1. Connect a compatible charger to a wall outlet.
2. Connect the charger to the device. If the battery is
completely discharged, it may take a while before the
charging indicator starts scrolling.
3. When the battery is fully charged, disconnect the charger
from the device, then from the wall outlet.
Your battery has been precharged at the factory, but the
charging levels may vary. To reach the full operation time,
charge the battery until it has been fully charged according
to the battery level indicator.
Tip: You can use older style Nokia chargers with your
device by attaching the CA-44 adapter to the old
charger. The adapter is available as a separate
enhancement.
Insert the memory card
Use a memory card to save the memory on your device. You
can also back up information from your device to the memory
card.
© 2008-2009 Nokia. All rights reserved.
The sales package of your device may not include a memory
card. Memory cards are available as separate accessories.
1. Open the cover of the memory card slot.
2. Insert the memory card in the slot with the contact area
first. Ensure the contact area is facing the connectors on
the device.
3. Push the card in until it locks into place.
4. Close the cover.
Eject the memory card
1. Press the power key briefly, and select
card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the cover.
Set up your device
Remove memory
17