Network Settings; Connection Settings - Nokia E63 Guia Del Usuario

To display your net call address to the person you are calling
using a net call, select Call
Yes.
To be notified of a new incoming call while you have a call in
progress, select Call Call waiting
>
Activate. To check if the function is active on the network,
select Options Check
>
To select whether net calls alert or not, select
call alert. You are notified of missed net calls with a
notification.
To set the default call type, select
and select Voice call if you make a GSM calls, or
call if you make net calls.
To send a text message automatically to the person who is
calling you informing why you cannot answer the incoming
call, select Call Reject call with SMS
>
for the message, select Call
To set off the contact search on the home screen, select
Contact search > Off.

Network settings

Select Menu Tools
> >
To select the network mode, select
mode, UMTS, or GSM. In the dual mode, the device switches
automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and reduce the
© 2008-2009 Nokia. All rights reserved.
Send my internet call ID
>
Options
>
status.
Call
>
Call Default call type
>
Internet
> Yes. To set the text
Message text.
>
Settings Phone > Network.
>
Network mode
battery life. In regions close to both GSM and UMTS
networks, selecting
>
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select
>
Manual to choose from available networks, or
have the device select the network automatically.
Internet To set the device to indicate when it is used in Micro Cellular
Network (MCN), select

Connection settings

Select Menu
Select from the following:
Bluetooth
•
receive data with Bluetooth," p. 104.
USB — Edit the data cable settings.
•
Call
>
cable," p. 103.
Access points
•
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
Packet data
•
are used, and enter the access point if you use your device
and Dual
as a modem for a computer.
Wireless LAN
•
indicator when a WLAN is available, and how often the
device searches for networks.
Dual mode
Operator selection
Cell info display
Tools Settings > Connection.
> >
— Edit the Bluetooth settings.
— Set up new or edit existing access points.
— Determine when packet data connections
— Determine if the device displays an
Settings
may cause constant
and
Automatic to
> On.
See "Send and
See "Data
125