Festool KAPEX KS 120 Manual De Instrucciones página 23

Circular cross-cut saw
KAPEX KS 120 E
Table of contents
1 Symbols
2 Technical data
3 Machine features
4 Intended use
5 Safety instructions
6 Commissioning
7 Adjustments
8 Operation
9 Service and maintenance
10 Accessories
11 Disposal
12 Warranty
13 EU Declaration of Conformity
1 Symbols
Warning of general danger.
Read the Operating Instructions/No-
tes!
Danger area! Keep hands, fi ngers
and arms away from this area.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Caution: laser beams!
Dispose of the machine, accessories
and packaging at an environmentally
responsible recycling centre.
2 Technical data
Power
Rotational speed (idle)
Tool spindle, dia.
Weight
Protection class
See section 8 "Operation" for the maximum
workpiece dimensions.
The specifi ed illustrations can be found at
the beginning an at the end of the operating
instructions.
3 Machine features
(1.1) Hand grip
(1.2) On/off switch
(1.3) Switch-on lock
(1.4) Lever for cutting depth limiter
(1.5) Rotary knob for clamping the guide
fi xture
(1.6) Transport safety device
(1.7) Scale for mitre cuts (vertical)
(1.8) Scale for mitre cuts (horizontal)
(1.9) Clamp lever for mitre cuts (horizon-
tal)
(1.10) Stop lever for preset mitre cut angles
(horizontal)
(1.11) Rotary handle for fi ne adjustment of
mitring angle (vertical)
(2.1) On/off switch for laser
(2.2) Adjusting wheel for rotational
speed
(2.3) Fastfi x spindle lock
(2.4) Clamping lever for stop ruler
(2.5) Release lever for special cutting posi-
tion
(2.6) Lever for special cutting position
(2.7) Cable holder with integral handle
(2.8) Clamp lever for mitre cuts (vertical)
(2.9) Selector switch for mitre angle range
(vertical)
4 Intended use
The electric power tool is a stationary unit
designed for sawing blocks of wood, plastic,
aluminium profi les and similar materials.
Do not process other materials, in particular
steel, concrete and mineral materials.
The electric power tool is designed and ap-
proved for use by trained persons or spe-
cialists only.
The user bears the responsibility for
damage and accidents caused by
improper use.Other risks
In spite of compliance with all relevant de-
15
1600 W
1400 - 3400 rpm
30 mm
21.5 kg
/ II