Connecting The Vcr - Aiwa HV-FX8100U Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PREPARATION

Connecting the VCR

Basic connections
Caution
All connections should be made with both your VCR
and TV unplugged from the Power supply.
3
To AC outlet
AC cord
1
Disconnect the antenna cable from your TV and connect it to the UHF/VHF
IN (ANT) connector on this VCR.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the UHF/VHF IN
(ANT) connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor
(not supplied), and connect the adaptor to the UHF/VHF IN (ANT) connector.
2
Connect the supplied antenna cable to the UHF/VHF OUT (TV) connector
on the VCR and the antenna connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
3
Connect the AC cord to the AC outlet.
To Connect a TV using the audio/video cable
If your TV has audio/video input jacks, you can connect the VCR and TV using the supplied
audio/video cable.
This connection improves the picture and sound quality.
75-ohm
coaxial cable
(not supplied)
UHF/VHF
IN (ANT)
OUT (TV)
Antenna cable
(supplied)
To antenna connector
OUT
VIDEO
L
AUDIO
R
Yellow
Red
White
audio/video cable (supplied)
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(not supplied)
1
Antenna splitter (not supplied)
2
TV
To UHF antenna terminal
CONTINUE
TV
UHF
VHF
300-ohm
To VHF antenna
terminal
TV
To audio/video
input jacks
4
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido