Accessories; Cable Selection; Tools For C-4, C-6, C-7, C-8, And C-9; Maintenance Instructions - RIDGID K-50 Manual De Uso

Accessories

WARNING Only the following RIDGID products have
been designed to function with the K-50 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-50. To
prevent serious injury, use only the recommended ac-
cessories.

Cables

Catalog Model
No. No.
62225 C-1
56782 C-1IC
89400 C-21
62235 C-2
56787 C-2IC
89405 C-22
62245 C-4
62250 C-5
62260 C-6
96037 C-6IC
62265 C-7
62270 C-8
51317 C-9
Accessories
Catalog Model
No. No.
59235 A-14-6
84325 A-14-10 10' Rear Guide Hose
59270 A-18
59210 A-10
59205 A-1
59295 A-2
59230 A-13
Adapters with Cable
Catalog Model
No. No.
59250 A-17-A
59255 A-17-B
59265 A-17-C
92095 A-17-D
92100 A-17-E
278-104-431.10_REV. C
Find Quality Products Online at:
Description
25' (7.6m) w/Bulb Auger
5 / " x 25' (7.6m) Inner Core
16
w/Bulb Auger
50' (15.2m) w/Bulb Auger
25' (7.6m) w/Drop Head Auger
5 / " x 25' (7.6m) Inner Core
16
w/Drop Head Auger
50' (15.2m) w/Drop Head Auger
25' (7.6m) w/Male Coupling
35' (10.7m) w/Bulb Auger
35' (10.7m) w/Male Coupling
35' (10.7m) w/Male Coupling
7 1 / ' (2.3m) Tight-Wind
2
7 1 / ' (2.3m) All-Purpose Wind
2
10' (3.0m) Heavy-Duty Wind
Description
6' Rear Guide Hose
Front Guide Hose Assembly
Cable Carrier (Holds 90' C-8, C-9)
Left-Hand Mitt
Right-Hand Mitt
Pin Key, 5 / - Cable
8
Description
'
Adapter with 25 x 5 / " Cable
16
w/Bulb Auger
'
Adapter with 35 x 3 / " Cable
8
w/Bulb Auger
'
Adapter with 35 x 3 / " Cable
8
w/Male Coupling
'
Adapter with 250 x 5 / " Cable
16
w/Bulb Auger
'
Adapter with 250 x 5 / " Cable
16
w/Drop Head
GlobalTestSupply
www.
K-50 Drain Cleaning Machine

Tools for C-4, C-6, C-7, C-8, and C-9

Catalog Model
No. No. Description
62990 T-201 Straight Auger, 5" Long
62995 T-202 Bulb Auger, 1
63000 T-203 Bulb Auger,
55457 T-225 Retrieving Auger
62067 T-201A Straight Flex Auger
63065 T-217 Drop Head, 4" Long
54837 T-204 "C" Cutter, 1"
63005 T-205 "C" Cutter, 1
63010 T-206 Funnel Auger, 3" Long
63015 T-207 Spiral Cutter, 1
63020 T-208 Spiral Cutter, 1
63025 T-209 Spiral Cutter, 2"
63030 T-210 Grease Cutter, 1"
63035 T-211 Grease Cutter, 1
63040 T-212 Grease Cutter, 1
63045 T-213 4-Blade Cutter, 1"
63050 T-214 4-Blade Cutter, 1
63055 T-215 4-Blade Cutter, 1
63060 T-216 Chain Knocker, 2"
63280 T-218 Flue Brush, 3"
63070 T-219 Flue Brush, 2
63080 T-220 Flue Brush, 2"
63220 T-221 Flue Brush, 1
52812 T-230 H-D "C" Cutter, 2"
52817 T-231 H-D "C" Cutter, 2
52822 T-232 H-D "C" Cutter, 3"
48482 T-250 Tool Set includes:
– T-203
– T-205
– T-210
NOTE! See Ridge Tool Catalog for complete list of tools
and accessories.

Maintenance Instructions

WARNING
Make sure machine is unplugged from power
source before performing maintenance or mak-
ing any adjustment.

Lubrication

Lubricate machine with grease at grease fitting (located on
jaw housing) once a week if used every day; once a
month if used less. Place a drop of oil on each of the bear-
ing points, thrust bearing, clutch jaws, etc., at least once
a year.
Cables
Cables should be thoroughly flushed with water to prevent
damaging effects of sediment and drain cleaning com-
pounds. Periodically lubricate cables and couplings with
RIDGID Cable Rust Inhibitor.
When not in use, store cables indoors to prevent dete-
rioration by the elements.
.com
sales@GlobalTestSupply.com
1 / " O.D.
8
7 / ", O.D.
8
3 / "
8
/ "
1
4
1 / "
2
3 / "
8
3 / "
4
3 / "
8
3 / "
4
1 / "
2
1 / "
2
/ "
1
2
– T-217
– A-13
11