Memory Function; Multi-Stage Cooking - Haier MWM0925TW Manual Del Usuario

English

13. MEMORY FUNCTION

(1) Press "MEMORY" to use the memory function. The LED will display 1,2,3.
(2) If the memorized procedure has been set, press "START/ +30 SEC." to use it.
If not, continue to set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
return to the waiting state. If you press "START/ +30 SEC."against, it will save the
operation and then begin operating the setting.
Auto menu cooking cannot be set as memory procedure.
Note
Example: To set the following procedure as "Memory 2," if you want to

14. MULTI-STAGE COOKING

This microwave oven can be set with 2 stages cooking at most. If one stage is
defrost by weight, it will placed as the first stage automatically. Only one of the 2
stages can be defrost.
Example: To defrost 20oz of beef first, and then cook with 80% microwave
power for 5 minutes:
17
cook the food with 80% microwave power for 3 minutes and
20 seconds, follow these steps:
1) In the waiting state, press "MEMORY" twice, until the
screen displays "2".
TIME COOK
2) Press "
Then press number keys "3, 2, 0" in order to input the
cooking time.
3) P res s "
POWER
and "P L 8" dis plays .
START/ +30 SEC.
4) Press "
once, then returns to the waiting state. If you press
sounds
"START/+30SEC." after the above step, the procedure
will be saved as the memory 2 and operated.
5) As long as the electricity is not cut off, the procedure
will be saved all the time. If electricity is interrupted, the
procedure needs to be reset.
6) If you want to run the saved procedure, in the waiting
state, press "MEMORY" twice. The screen displays "2".
Then press "START/+30SEC." to run.
1) Press "DEFROST" once to choose defrost by weight function.
"dEF1" displays.
2) Press "2, 0" in sequence to set the weight.
TIME COOK
3) Press "
Then press number keys "5, 0, 0" in order to input the
cooking time.
4) P res s " POWER
and "P L 8" dis plays .
START/ +30 SEC.
" once.
" once, "P L 10" dis play,then pres s "8"
" to save the setting. The buzzer
" once.
" once, "P L 10" dis play,then pres s "8"
" to save the procedure and
.
.