Preparing For The Measurement - Beurer BC 80 Instrucciones De Uso

Information on the display:
1. Classification of measurements
2. Time and date
3. Systolic pressure
4. Diastolic pressure
5. Resting indicator (symbol is inactive)
6. Cardiac arrhythmia symbol
Pulse symbol
7. Calculated pulse value
8. User memory /
9. Pump up, release air (arrow)
10. Memory space number/memory display
average value ( A ), morning ( AM ), evening ( PM )
11. Battery status indicator
1 2
11
10
9
8
!
OK
7 6 5

4. Preparing for the measurement

Inserting the batteries
• Remove the battery com-
• Insert two 1.5 V micro (al-
• Close the battery compartment lid again carefully.
If the battery change symbol
no more measurements are possible and you must replace
all batteries.
All display elements are briefly displayed, 24h flashes in the
display. Now set the date and time as described below.
3 • The empty, completely flat batteries must be disposed of
• The codes below are printed on batteries
4
19
partment lid on the left
side of the device.
kaline type LR03) batter-
ies. Make sure that the batteries are inserted the correct way
round. Do not use rechargeable batteries.
Battery disposal
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
is flashing and E6 appears,