Transport And Storage; Packaging; Wood Protection; This Must Be Considered Before Installation - Weka Holzbau Teil 2 Instrucciones De Montaje

4. Preparation/information for assembly and use

4.1. Transport and storage

The product is delivered stacked on pallets.
After unpacking and checking, handle the parts as follows:
Protect the wood against
long-term,
direct sunlight
Incorrect storage may result in:
Wood is a natural product. Varied colouring, knurls and crack formation are normal and have no influence on the
statics.
Dry cracks may form as a result of extreme weather conditions, especially after long hot periods. These dry cracks
are in no way a defect in quality but are a part of the natural appearance of the wood. Depending on the weather,
these cracks may close up again to a minimum. Moreover, these dry cracks, which form longitudinally in the wood,
have no effect on the strength and resilience of the material.

4.2. Packaging

Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.

4.3. Wood protection

The product consists of the natural product wood. This makes that it must be regularly treated with sufficient
wood preservation measures. For professional wood preservation treatment, contact a wood preservative
expert.
Wood preservation measures are the responsibility of the customer. No guarantee can be given if the wood is
not properly preserved. Please also read the provisions relating to this in our guarantee statements.
Remember to treat the interior and exterior of doors with your selected wood protection agent.

4.4. This must be considered before installation!

Techn. Änderungen vorbehalten!
moisture
- Cracks
- Distortion and warping
- Rotting (infestation by pests, etc.)
Store the wood such that it is protected against weathering and
has sufficient ventilation.
Alle Maßangaben sind ca. Maße.
8
floor contact
 Copyright HRB 3662