EHEIM LOOP Serie Manual De Instrucciones página 13

English
4. Commissioning
Install the overflow pipe (⌦A)
LOOP5000/7000
1. Insert the outlet spigot ③ through the opening in the filter housing.
2. Slip the seal ② onto the outlet spigot from the inside.
3. Screw the outlet spigot onto the overflow pipe ①.
LOOP10000/15000
1. Insert the outlet spigot ③ through the opening in the filter housing.
2. Slip the seal ② onto the outlet spigot from the inside.
3. Screw the outlet spigot onto the overflow pipe ①.
4. Install the second overflow pipe in identical order.
Install UVC clarifier (⌦B)
LOOP5000/7000
1. Slip the sealing washer ② onto the thread of the UVC clarifier ①.
2. Insert the UVC purification unit through the opening in the filter housing.
3. Screw the intermediate piece ③ onto the UVC clarifier from the inside.
4. Screw the sprinkler pipe ④ onto the intermediate piece.
5. Insert the screw ⑤ with the washer ⑥ and the O-ring ⑦ through the hole in the mounting bracket of
the UVC clarifier from the inside.
6. Tighten the UVC clarifier using the screw ⑨ and the washer⑧.
LOOP10000/15000
1. Slip the sealing washer ② onto the thread of the UVC clarifier ①.
2. Insert the UVC purification unit through the opening in the filter housing.
3. Screw the T-intermediate piece ③ onto the UVC clarifier from the inside.
4. Screw the two sprinkler pipes ④ onto the T-intermediate piece.
5. Insert the screw ⑤ with the washer ⑥ and the O-ring ⑦ through the hole in the mounting bracket of
the UVC clarifier from the inside.
6. Tighten the UVC clarifier using the screw ⑨ and the washer ⑧.
Inserting the filter (⌦C)
LOOP5000/7000
1. Fill the included net with the EHEIM FILTERBIO granulate (biological filter granulate).
2. Insert the filter in the filter housing in the following order:
① Net with EHEIM FILTERBIO granulate
Attention: The net must lie flat on the housing base
② Blue filter foam, fine
③ Active carbon fleece
④ Blue filter foam, coarse
LOOP10000/15000
1. Fill the EHEIM FILTERMEC granulate (mechanical filter granulate) ① loosely in the filter housing.
2. Insert the filter in the filter housing in the following order:
② Blue filter foam, fine
③ Active carbon fleece
④ Blue filter foam, coarse
13