Before Installation; How To Use The Buckle; How To Adjust The Harness - Foppapedretti Iturn duoFIX Instrucciones De Montaje

4. BEFORE INSTALLATION

4.1 How to use the buckle

4.2 How to adjust the harness

To loosen the harness
Press the adjustment button and at the same time grip the straps (chest belts) at the
bottom, under the pads of the chest protectors, and pull them forwards to loosen them
(fig.6). IMPORTANT: Do not pull on the shoulder pads.
• ENGLISH •
BEFORE INSTALLATION
1
1
To release the buckle
4
Press the red button to remove the tabs from the central buckle
4
(fig. 1).
To attach the buckle
Hold together the central buckle tabs (fig. 2) and insert them in
the special slot inside the harness buckle (fig. 3). A "click" will
indicate that it has attached correctly (fig. 4).
NOTE: to attach the buckle, it is necessary to insert both tabs.
5
5
2
2
To tighten the harness
6
Pull the adjustment strap so that
6
the harness is tight and close to the
child's body (fig. 5).
NOTE: Check that there is a one-
finger space (1 cm) between
the straps and the upper part of the
shoulders. Make sure that the child
is comfortable and protected.
41
3
3