Symbol Indication / Troubleshooting - Topcom BD-4601 Manual De Usuario

13

Symbol indication / Troubleshooting

Display symbol Condition/Cause
The flashing heart will appear when the
pulse is detected during a measurement.
Appears when the battery voltage is
excessively low or the position of batteries
is incorrect.
Appears for 1 minute when the user was
talking, moving or shaking or an irregular
heart beat was detected during
measurement.
Indicates the average of last
3 measurements.
Indicates the number of measurements
stored in the memory.
Appears when measurement error occurs
or the blood pressure value is displayed
excessively low or high.
Air circuit abnormality.
Cuff tube may not be plugged into monitor
correctly.
Inflation pressure exceeding 300 mmHg.
Error determining measurement data.
Note: If "EP" appears on the display, just return the devise to your local distributor
or importer.
BD-4601 (BPM Arm 1500)
Corrective action
Measurements in process.
Do not talk or move.
Replace all batteries with new ones.
Make sure the +/- polarity is correct.
Repeat the measurement.
Note that you be relaxed for at least 5
minutes and sit comfortably and
quietly before you restart a
measurement.
Replace all batteries with new ones.
Make sure the +/- polarity is correct.
Check the cuff connection.
Measure again.
Turn the device off, then measure
again.
Measure again.
11