Sears Kenmore 111.83532 Manual De Uso Y Cuidado página 19

Cooking + Cooking
1. Press TIME COOK pad. The COOK indicator lights and ENTER, TIME indicators blink., " : 0" is
displayed.
2. Press number pads for the cooking time. The display will show what you pressed.
• Your oven can be programmed for 99 minutes 99 seconds. (99:99)
3. Press TIME COOK pad. The COOK indicator lights and ENTER, TIME indicators blink., " : 0" is
displayed.
4. Press number pads for the cooking time. The display will show what you pressed.
• Your oven can be programmed for 99 minutes 99 seconds. (99:99)
5. Press POWER LEVEL pad. The display will show PL10 for 100% power.
6. Press number pads for power level (0~10). The display will show PL-0 ~ PL10
7. Press START pad.
• If you skip 5 and 6 step, 100% power is automatic.
• When you press START pad, the COOK indicator starts blinking to show the oven is in cook for
stage 1.
At the end of stage 1, the oven will beep and start stage 2.
the time remaining in stage 2 mode. When stage 2 ends, you will hear 3 beeps.
ADD 30 SEC
ADD 30 SEC allows you to reheat for 30 seconds at 100% (full power) by simply pressing the
START/ADD 30 SEC pad. By repeatedly pressing the START/ADD 30 SEC pad, you can also
extend reheating time to 99 minutes 99 seconds by 30 second increments.
1. Press the START/ADD 30 SEC pad.
":30" is displayed and the oven starts reheating.
NOTE: ADD 30 SEC cannot be used while the sensor is detecting the vapor emitted from the food
during sensor cooking such as Potato, Frozen Entree, Frozen Vegetables or Reheat.
EN-17
The display counts down