Peg-Perego Pliko P3 Modular Instrucciones De Uso página 22

EN_English
Thank you for choosing a Peg-Pérego product.
WARNING
_ IMPORTANT: read these instructions carefully
and keep them for future use. The child's safety
could be at risk if these instructions are not
followed.
_ This item was designed for the transport of 1 child
in the seat and 1 one child standing on the rear
footboard.
_ Do not use this item for a number of occupants
greater than that intended by the manufacturer.
_ This item is approved for children from birth up to
a weight of 15 kg in the seat. The rear footboard is
approved for the transport of a second child up to a
weight of 20 kg.
_ This item was designed for use in combination with
the following Peg Perego Ganciomatic products:
the "Primo Viaggio tri-fix es" car seat (Group 0+) and
the Navetta XL (Group 0).
_ Before use check that the Peg Perego Ganciomatic
products are correctly fixed to the item.
_ The assembly and preparation of the item must be
carried out by an adult.
_ Do not use this item if there are parts missing or
signs of breakage.
_ Always use the five point harness; always use the harness
crotch strap in combination with the waist strap.
_ It may be dangerous to leave your child unattended.
_ Always apply the brake when stationary.
_ Before use check that all the attachment
mechanisms are correctly engaged.
_ Do not insert fingers into the mechanisms.
_ Be careful not to hurt the child when adjusting the
mechanisms (handlebar, backrest).
_ Any weights hanging on the handlebar or
handles could make the item unstable; follow
the manufacturer's instructions as regards the
maximum loads transportable.
_ The front bar is not designed to support the child's
weight. It is not designed to keep the child in the
seat and does not substitute for the waist belt.
_ Do not load the baskets over 5 kg. Do not put
weight in the cup holder in excess of those
indicated on the cup holders themselves and never
hot drinks. Do not put loads of more than 0.2 kg in
the hood pockets (if present).
_ Do not use the item near to stairs or steps, heat
sources, naked flames or dangerous objects within
reach of the child.
_ The use of accessories not approved by the
manufacturer could be dangerous.
_ This item is not suitable for jogging or roller skating.
_ Apply the brake when loading or unloading children.
_ WARNING: Do not add a mattress.
P3Modular&P3OnTrackModular-EU_FI22 22
ITEM FEATURES
Pliko P3 Modular and Pliko P3 On Track Modular
_ These items are given serial numbers.
_ They consist of: Pliko P3 chassis, stroller seat,
Navetta XL, Primo Viaggio tri-fix es car seat,
Changing Bag, Rain Canopy.
Pliko P3 On Track Modular is a modular system
with a single cover that can be fitted on both the
Navetta XL and the stroller.
ITEM COMPONENTS
Check the contents of the packaging. For any
complaints, please contact the Assistance Service.
Pliko P3 Modular:
_ The Pliko P3 chassis consists of: 2 swivelling or
locking front wheels, 2 rear wheels with a brake
cable, a basket, a drink holder and a front bar.
_ The Pliko P3 seat consists of: a hood, a cover, a rain
canopy and a changing bag.
_ The Navetta XL consists of: a hood and a cover.
_ The Primo Viaggio tri-fix es car seat consists of: a hood,
a safety harness, a booster cushion, two protective
shoulder pads and a protective leg cushion.
Pliko P3 On Track Modular:
_ The Pliko P3 chassis consists of: 2 swivelling or
locking front wheels, 2 rear wheels with a brake
cable, a basket, a drink holder and a front bar.
_ The Pliko P3 seat consists of: a hood, a cover which
can also be used for the Navetta XL, a rain canopy
and a changing bag.
_ The Navetta XL consists of: a hood.
_ The Primo Viaggio tri-fix es car seat consists of: a hood,
a safety harness, a booster cushion, two protective
shoulder pads and a protective leg cushion.
INSTRUCTIONS FOR USE
1• OPENING: before opening the chassis, remove the
two clip protector caps, otherwise it will not open
correctly (Fig.a). To open the chassis, pull the two
levers on the handles upwards (Fig.b).
2• At the same time, lift the chassis and it will
automatically open (Fig. c). Check the two side clips
to ensure that the stroller has opened properly (Fig.
d).
3• ASSEMBLY: To fit the front wheels, lower the lever
(A) and push in the wheel (B) until it clicks into
position.
4 • To fit the rear wheels, joined by the brake cable,
carefully identify the left wheel from the right
wheel to ensure correct engagement. The left
wheel has a ridge on the wheel tube and one on
the chassis (Fig.a). Insert them (Fig.b), ensuring
that they are correctly engaged, until they click
into position (Fig.c).
5• BASKET: to fit the basket, insert the loops onto
- 22 -
11-02-2010 17:12:48