Cleaning Instructions - Progressive Electronics PE395 Manual De Instrucciones

Changing the Battery or Cord Set
Do not remove the cover while the test set is connected to a
circuit.
Electric shock or damage to the test set can result.
1. Disconnect the unit from the circuit.
2. Remove the two cover screws and the cover.
3. Replace the battery or cord set as shown. Observe polarity.
4. Replace the cover and screws.
Screw
To
Belt Clip
Black Wire

Cleaning Instructions

Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents.
8
Screw
9V ALKALINE
A Positive or Tip (Black)
B Negative or Ring (Red)
C Ground Start
Red Wire