Cleaning Instructions - Progressive Electronics PE945 Manual De Instrucciones

Changing the Battery or Cord Set
1. Disconnect the unit from the circuit.
2. Remove the three cover screws and the cover.
3. Replace the battery or cord set as shown. Observe polarity.
4. Replace the cover and screws.
Black Wire
*
Green wire shown in diagram is part of the optional PE901 ground starting wiring kit.

Cleaning Instructions

Periodically wipe the case with a damp cloth and mild detergent.
Green Wire Red Wire
*
–
+
A Positive or Tip (Black)
B Negative or Ring (Red)
C Earth Ground (Green)
PE945
11