13. Stuff, if necessary, the meat respectively the dough with
the stuffer (17).
NOTE:
Short-term operation: Operate the appliance with the
meat grinder no longer than 6 minutes and allow the
appliance to cool down for 10 minutes.
Complete Operation
1. Set the knob in the
position.
2. Disconnect the power plug.
3. Disassemble all parts of the meat grinder.
4. Clean the parts used as described under "Cleaning".
5. Cover the uptake for the spiral housing with the cover
(15).
The Mixer
Application Instruction for the Mixer
WARNING: Risk of Injury!
• The knife in the mixer is sharp! Handle the blades
of the mixer with the necessary care, especially when
emptying and cleaning the mixing bowl!
• Do not reach into the mixing container during opera-
tion! You could be hurt by the rotating knives.
• Once you turn on the appliance, the drive shaft of the
kneading machine starts rotating. Do not reach into the
rotating drive shaft during operation!
• Always mount the bowl for your safety.
CAUTION:
• Never activate the lever (6) when you have attached
the mixing vessel! The mixing vessel will tip over.
• Do not operate the mixer without food!
• The glass could crack at high temperatures! Do not fill
in liquids over 60 °C.
• Do not overfill the mixing bowl! Fill in a maximum of
1500 ml (fruit and liquid).
• Foam takes a lot of volume. Reduce the capacity for
liquids that foam vigorously.
• Keep one hand on the lid when working with large
filling quantities.
• Cut the food into small pieces before operating the
appliance.
• The mixer is not suitable for chopping hard foods e.g.
ice cubes, nutmeg, or blocks of chocolate.
WARNING:
• Always disconnect the power plug before cleaning.
58
PC-KM1189_IM
CAUTION:
• Objects like spoons or scrapers never may be in the
mixing vessel during operation.
Place the mixing bowl on a stable level surface when filling
it. So you can better place the cover afterwards.
Preparation
1. Assemble the bowl without tools.
2. Cover the uptake for the spiral housing with the cover
(15).
3. Fill in the crushed ingredients into the mixing bowl.
4. Press the lid firmly onto the mixing vessel.
5. Close the refill opening with the cap. Insert the cap into
the refilling opening and tighten it clockwise.
Operation of the Mixer
6. Make sure that the arm is lowered and locked.
7. Remove the safety cover (4) from the shaft drive of the
mixer motor.
8. Place the mixing bowl on the drive shaft of the mixing
engine. Place the mixing container with the symbol
of the mixing container over the
station. Turn the mixing jug clockwise up to the stop. The
and symbols must be aligned with each other.
9. Plug the power cord into an approved mains outlet.
10. Select a speed level.
NOTE:
• Short-term operation: Operate the appliance no
longer than 2 minutes when mixing. Let it cool down for
3 minutes before re-using it.
• To refill ingredients, turn off the appliance. Remove
the cap or lid. Continue operation only with the refill
opening closed.
Complete Operation
1. Set the knob in the
2. Disconnect the power plug.
3. Remove the mixing bowl.
4. Lift the lid before pouring out the contents.
5. Clean the parts used as described under "Cleaning".
6. Cover the drive shaft of the mixing engine with the
safety cover.
IMPORTANT NOTE:
Never keep citrus juices or acidic foods in metal bowls.
Cleaning
symbol on the base
position.
23.07.19