Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
Voltage /
Frequency
Power
Numbers of
temperatures
Temperature
Cord
Weight
POWER TOOL SAFETY
WARNING To avoid electrical
hazards, fire hazards or damage to the
heat gun, use proper circuit protection.
FLYING DEBRIS can cause
permanent
Prescription eyeglasses ARE NOT a
replacement for proper eye protection.
Use protective gloves to
protect your hands from burns.
Always wear a dust mask
designed to protect you from dust
created by your power tool.
Some dust created by power
sanding, sawing, grinding, drilling and
other construction activities contains
chemicals known to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement
and other masonry products.
120 / 60Hz
1500W
2
482º - 842º F
2m
2.97Lb
eye
damage.
•
Arsenic
and
chemically-treated lumber.
Your level of risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals, work in
a well-ventilated area and work with
approved safety equipment such as
dust masks that are specially designed
to filter out microscopic particles.
WARNING
Use hearing protection, particularly
during extended periods of operation
of the tool or if the operation is noisy.
Read and understand all instructions.
Failure to follow all Instructions listed
below may result in electric shock, fire
and/or serious personal injury.
WORK AREA
Keep your work area clean and well
lit. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in
potentially explosive environments,
such as in the presence of flammable
liquids, gas or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep bystanders, children and
visitors away while operating the
tool. Distractions can cause you to
lose control.
chromium
from
2
Publicidad
Tabla de contenido
