Promaker PRO-PC1500KIT Manual Del Usuario página 6

Keep the heat gun in constant
motion. Do not stop or dwell in one
spot.
Use extreme caution if the opposite
side of the work surface such as
siding is not accessible. The hidden
side could catch fire if it becomes
too hot. Some buildings contain
flammable material behind the siding,
floors, fascia, soffit boards and other
such panels. Check these areas
before applying heat. Do not use the
heat gun if flammable materials are
present or if you are unsure of the
flammability of the hidden material.
Do not use the heat gun near
surfaces with cracks or near metal
pipes, flashings, etc. Heat may be
conducted behind the work surface
and ignite hidden material.
At the end of each work session,
place the paint chips and dust in
a double plastic bag. Close the bag
with a twist tie and dispose of it in
accordance with local regulations.
Remove protective clothing and
shoes in the work area to avoid
transferring dust into other areas
of the building. Wash work clothes
separately using a high quality
detergent. Wipe shoes off with wet rag
and then wash the rag with the work
clothes or dispose of it in the bag of
dust and debris.
The ignition of hidden material may
not be readily apparent and can cause
property damage and injury.
Do not use the heat gun in the presence
of flammable liquids or gases.
Do not use the heat gun near
combustible materials such as dry
grass, leaves or paper which can
catch fire.
Do not lay the heat gun on a
flammable surface during operation
or immediately after turning it OFF.
The nozzle becomes very hot. Always
set the heat gun on a flat level surface
so the nozzle is directed upward and
and away from the supporting surface.
Never touch the nozzle immediately
after use. It will be very hot and can
cause severe burns.
Never use the heat gun as a hair
dryer. The extreme heat will burn your
scalp and scorch your hair.
Always use gloves while operating
the heat gun. Tools and scrapings
become very hot.
Always treat the heat gun with the
same respect as an open flame.
It can bum you and cause a fire if
not handled and used with extreme
caution.
WARNING
Never operate the heat gun if the
blower motor does not turn ON.
Turn the heat gun OFF immediately.
Operating the heat gun without the
blower motor running will burn the
element out.
EXTENSION CORD SAFETY
WARNING
Keep the extension cord clear of the
working area. Position the cord so it
6