Stroller Operation - Joie litetrax 4 Manual De Instrucciones

Ocultar thumbs Ver también para litetrax 4:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
see images
-
5
6
Assemble Armbar
see images
-
7
8
The completely assembled stroller is shown as
9

Stroller Operation

Adjust Backrest
see images
-
10
11
There are 4 recline angles for the backrest.
Recline Backrest
To recline the backrest, squeeze the recline handle on the back of the seat, pull down on the backrest.
Raise Backrest
To raise the backrest, push up.
11
!
Make sure the recline is set properly for use.
Use Buckle
see images
-
13
12
Release Buckle
Press the center button to release the buckle.
12
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A "click" sound means the buckle is locked completely.
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on a child's neck.
Use Shoulder & Waist Harnesses
see images
-
14
17
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
14
Shoulder harness anchor A
- 2
14
Shoulder harness anchor B
- 3
Slide adjuster
14
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
child's shoulder height.
16
Use slide adjuster to change the harness length.
17
13
- 1
- 2
, and click into the center buckle.
13
13
- 3
13
15
Rethread it through the slot that is closest to
- 1
Press the button
17
Adjust Calf Support
see images
The calf support has 2 positions.
To raise the calf support, push it upwards. A "click" sound means the calf is locked completely.
To lower calf support, press the adjustment buttons on both sides of the calf support
support downwards.
Use Front Swivel Lock
see images
Push up the front swivel locks to maintain the moving direction.
10
Tip
It is recommended to use swivel locks on uneven surfaces.
Use Brake
see images
To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
Always set the parking brake when stroller is not moving.
Use Hood
see images
The hood can be opened or folded, pull it toward front or back.
The hood can be opened completely to protect your child from the sun uttermostly, just unzip the hook
and then pull the hood toward front.
There is a window on the hood, through which you can view your baby.
!
Total maximum weight of hood pocket MUST not exceed 0.5kg.
Fold Stroller
see images
!
Please fold the hood before folding the stroller.
1. Pull the folding webbing upward, the frame will automatically fold backward.
2. The storage latch will automatically hook onto the storage mount, then the stroller is folded and locked
completely.
24
3. The stroller can stand when folded.
- 2
, while pulling the waist harness to proper length.
18
- 2
18
19
19
-
20
21
20
21
22
-
23
25
25
- 3
17
- 1
18
, and rotate the calf
,
22
- 1
23
14

Publicidad

Tabla de contenido
loading

Tabla de contenido