Sears Kenmore 3627325190 Manual De Uso página 26

Care and Caeaning
Proper care and cleaning are important so your range
will give you efficient and satisfactory service.. Follow
these directions carefully in caring for it to help assure
safe and proper maintenance°
BE SURE ELECTRICAL POWER IS DISCONNECT-
ED BEFORE CLEANING ANY PART OF YOUR
RANGE.
Sealed Burner Assemblies
(on some models)
CAUTION: DO NOT OPERATE THE BURNER
WITHOUT ALL BURNER PARTS AND DRIP PANS
(IF SO EQUIPPED) IN PLACE.
Grate
/(._ Burner Cap
__ Bumer Head
p Pan
(on some models)
\\
r Base
Turn all controls OFF before removing burner
parts and drip pans (if so equipped).
The burner grates, caps, burner heads and drip pans
(if so equipped) can be lifted off, making them easy to
clean_
The electrode of
the spark igniter
is exposed, When
one burner is
turned to LITE, all
the burners spark_
Do not attempt to
disassemble or clean around any burner while
another burner is on. An electric shock may result,
which could cause you to knock over hot
cookware_
Burner Caps (on
sealed burners
only)
Lift off when cool, Wash burner caps in
hot, soapy water and rinse with clean
water° If desired, soak up to 30 minutes.
Scour with a plastic scouring pad to
remove burned-on food particle& Dry in a
warm oven or with a cloth--don't
reassemble them wet.
BurRer Base (oh sealed burners only)
The burner base (the part of the burner
fastened to the co0ktop) may be cleaned
with a soft brush and a mild cleanser.
Clean all food residues from around the
spark electrode. Do not use steel wool;
small bits of steel wool will short out the
electrode. Rinse well
26