Switching Between Cooling And Heating - Dometic TROPICOOL Serie Instrucciones De Uso

TCX07, TCX14, TCX21, TCX35
✓ The cooling device starts to cool or heat the interior space.
Operating display
red (fig. 4 2, page 4)
blue (fig. 4 3, page 4)
6.7

Switching between cooling and heating

TCX07
➤ If you wish to switch between cooling and heating, push the switch on the
operating panel (fig. 3 3, page 4) into the "HEISS/HOT" or "KALT/COLD"
position.
✓ The red or green operating display lights up and the device begins
cooling/heating.
➤ If you wish to end the cooling/heating process, push the switch on the operating
panel (fig. 3 3, page 4) into the "AUS/OFF" position.
➤ If you wish to switch off the device, pull out the connecting cable.
TCX14, TCX21, TCX35
➤ If you wish to switch between cooling and heating, press the
button "HOT/COLD".
I
NOTE
The control unit of the cooling device has a memory function.
It memorises the selected temperature range for each mode (cooling
and heating). Thus the temperature range which was previously
selected in the respective mode is set again with each switching on or
switching over.
✓ The red or blue operating display lights up and the device starts to cool/heat.
➤ When you want to finish the cooling or heating process, press the button "P".
➤ When you stop using the cooling device, disconnect it from the mains.
EN
Operating mode
heating
cooling
Operation
15