Monogram ZV830 Manual Del Propietário página 9

Questions? PROBLEM
FAN FAILS TO CIRCULATE • Check to be sure the metal grease filter and the charcoal filter
Use this
AIR OR MOVES AIR
problem
SLOWER THAN NORMAL
solver!
FAN KEEPS GOING
OFF AND ON
LIGHTS WILL NOT WORK
AND RINGS AROUND THE
OPERATING BUTTONS
ARE FLASHING
LIGHT WILL NOT STAY
ON HIGH SETTING
THE HOOD CONTROLS
ARE NOT OPERATING
CORRECTLY
SEQUENTIAL PRESSES
OF THE LIGHT OR FAN
BUTTONS WILL CHANGE
THE SETTING FROM THE
LOWEST SETTING TO OFF
TO THE HIGHEST SETTING,
OR FROM THE HIGHEST
SETTING TO OFF TO THE
LOWEST SETTING
WHEN PRESSING THE
MEMORY/OFF BUTTON
TO TURN ON THE LIGHT,
THE FAN COMES ON
INSTEAD
POSSIBLE CAUSE
(if present) are clean. Clean the metal grease filter (see the Metal
grease filter
Visit GEAppliances.com
check ductwork for blockage. If off and on cycling continues, call
Light bulbs section.
make sure they are inserted securely. It is important to replace with
• So that you can easily set the controls to the desired setting, the hood
This is normal.
want only the lights on, press the "FAN
turn the fan off. When you power the hood up next time, only the
lights will function. NOTE: You may turn the fan and lights off or on
Chimney Hood
Charcoal filter
be sure the filter is clean and
Light bulbs section.
9