Technical Data; Functional Description - Festool CONTURO KA 65 Manual De Instrucciones

fixture supplied by Festool. The electric power
tool may become unsafe and cause serious acci-
dents if installed in benches from other manufac-
turers or self-manufactured work benches.
– Always use original Festool accessories and ad-
hesive cartridges. Only products tested and ap-
proved by Festool are harmless to health and
Edge bander
Power
Power supply
Mains frequency
Edge height
Edge thickness
Inner radius
Heating time
Default melting temperature setting
Melting temperature setting range
Feed speed
Safety class
Weight (without adhesive cartridges and mains cable)
*
Depending on material
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
[1-1]
Start button
[1-2] Feed speed button
[1-3] Handle
[1-4]
Rotary knob for adjusting the edge
height
[1-5] Mains power cable
[1-6] Extractor connector
[1-7]
Switch for temperature selection
[1-8]
On/Off switch
[1-9] Safety lever for purging
perfectly adapted to the machine and application.
Please refer to the safety data sheet for addition-
al specifications. See Festool catalogue or
www.festool.com.
– Observe national safety regulations!
i

Technical data

Functional description

[1-10]
[1-11]
[1-12]
[1-13]
[1-14]
[1-15]
[1-16]
[1-17]
[1-18]
[1-19]
[1-20]
[1-21]
Accessories shown or described are sometimes not
included in the scope of delivery.
0.5 - 3.0 mm (0.02 - 0.1'')
Setting 1
Setting 2
Setting 1/2
1st gear
2nd gear
Inlet roller
Edge inlet
Central plate
Drip catcher
Adhesive nozzle
Contact roller
Handle
Support base with start marking
Flap
Menu buttons
Display
Refill button
KA 65
1050 W
120 V~
60 Hz
18 - 65 mm (0.7 - 2.6'')
> 50 mm (2.0'')
approx. 8 min
190 °C
200 °C
100 - 210 °C
2 m/min
4 m/min
7.9 kg (17.4 lbs)
*
*
*
I
9