Maintenance; Troubleshooting; Technical Data; Installation - Rancilio KRYO 65 OD Manual De Instrucciones

3. MAINTENANCE

Maintenance operations should be carried out with the machine
turned off and with the plug removed from the power source.
We recommend the cleaning products you can buy from us.
Do not use metallic or abrasive tools, such as steel wool, metal
brushes, needles, etc., or detergents (alcohol etc.), but simply a
damp cloth or sponge.
3.1. Daily
- Clean the housing and the grounds tray.
- Clean fork area for the filter holder.
- Clean the coffee outlet with a brush.
3.2. Periodically or after intense use
Empty the bean hopper, and clean it of oily residues left by the
coffee with a mild soap solution. Rinse thoroughly!
Waste materials used for processing or maintenance, if not
biodegradable or pollutant, should be placed in separate
containers and taken to suitable collection centers.
3.3. Burr replacement
KRYO 65 OD has an integrated counter, which informs the user
after the predefined amount of coffee is grinded, that the burrs
have to be replaced.
This alert can be activated by the service technician during the
commissioning. We recommend activating the alarm.
The burr replacement has to be done by a qualified service
technician only.
Please get in contact with your local sales organization.

4. TROUBLESHOOTING

Inspection that can be carried out by the user
For any type of problem or difficulty not specified here, unplug the
machine, refrain from making attempts to repair or inspect the
machine yourself and contact an authorized service technician.
A) The machine does not turn on:
- Check that it is plugged in;
- Check that there is power being supply and that the automatic
circuit breaker or main switch is turned on;
- Check the condition of the plug and supply cable, and if they
are damaged have them replaced by a qualified technician.
B) Coffee is not ground:
- Check that there are coffee beans in the bean hopper;
- Check that the hopper locking slide is open (lever inwards)
C) Long grinding time
- Check the grind setting;
- Have the burrs replaced by qualified staff.

5. TECHNICAL DATA

Version
Machine size
Net weight of machine
Production
Bean hopper capacity
KRYO 65 OD
mm L.220 - D.356 - H.575
kg 13
g/s 3.5
g 1300
Identification details, specifications plate (Fig. 3)
1. Manufacturer
2. Model and version
3. Voltage
4. EC Conformity mark
5. Serial number
6. Pin
7. Total absorption
8. - -
9. - -
10. - -
11. Frequency
12. Conformity marks
13. Date of manufacture

6. INSTALLATION

A qualified technician must perform installation.
The machine is delivered ready for installation according to the
data on the plate Fig. 3.
Check that the main power supply is compatible with the machine.
Check that the machine, the accessories, the supply cable and the
plug are intact, and in the event of damage, inform the retailer
promptly.
The machines have been designed and built for grinding coffee
beans for professional use.
Any other use is to be considered improper and thus dangerous.

7. FIRST START-UP

7.1. Description of commands
Main switch (Fig. 1-9) with two positions; when switched on, the
machine is ready for coffee grinding.
7.2. First startup
KRYO 65 OD has a startup menu to select the personal preferences
of the operator, when switched on for the first time. Operator has
to choose the language, the mode, the pre-selection and the way to
activate the grinding. After choosing the preferences, the display
will show a message "Do Calibration". The calibration has to be
done with the procedure shown in the software structure under
Counter/Burrs/Calibration.
This message will be shown after each preparation up to the time,
the calibration has been done.
7.3. Grind setting
The grinders are tested by the manufacturer with a medium grind
setting. The setting depends on the type of coffee used.
- Place a small quantity of coffee beans in the bean hopper
and close the lid;
- Check that the hopper locking slide is open (Fig. 1–4)
- Position the filter holder on the filter holder fork (Fig. 1-8)
and grind coffee;
- Brew some coffee, checking the dispensing time, the
appearance of the coffee and its taste, considering that
excessively course grounds produce light coloured coffee
without a crema, while grounds that are too fine result in
strong, dark coffee without a crema.
- If the coffee does not respond to your desired requirements,
adjust grind fineness by pressing the ring block button (Fig. 2-1)
and turning the regulation knob (Fig. 2-3) counter-clockwise for
a finer grind or clockwise for a coarser grind.
- Repeat the operation until you have obtained the desired
quality of coffee.
Recalibration of the grind is typically only necessary after a change
in coffee. Minor adjustments may be required throughout use to
accommodate for changes in freshness of the beans.
11