Satlink FB250 Manual De Usuario página 199

I
IP Configuration
By default, the Dynamic IP Address is selected.
Follow these steps to use Static IP Address:
1. Select Static IP Address and enter the IP Address in the space
provided.
2. Check the Header Compression checkbox if it is required to use
Header Compression. EXPLAIN HEAD.
Follow these steps to set Streaming Parameters:
1. Select the Desired Rate: 32k, 64k or 128k.
2. Select the Minimum Rate(minimum that user can accept;if de-
sired rate cannot be allocated by network): 32k, 64k or 128k.
3. Check the Error Correction checkbox if it is required to use Error
Correction.
Enabling error correction should only be enabled under
198 info@satlink.es
N
Header compression is to compress TCP/IP
header to optimize the bandwidth used.
Check your SP supports this feature
high interference environments.