Origo
5
Intended use
The Origo heater 5100 is a non-pressurized alcohol heater designed for use in vehi-
cles or boats. It can be used as heater or as cooking device.
6
Technical description
The heater is made of aluminium and stainless steel and uses the absorption princi-
ple. The canister has a capacity of 1.2 l. Denatured or soot free alcohol is used as fuel.
Alcohol is absorbed into a non-flammable material in the canister.
7
Using the heater
!
WARNING!
The top cover (fig. 1 1, page 3) and the outer container (fig. 1 9,
page 3) heat up when in use. Touching them can cause severe burns.
7.1
Filling-in denatured alcohol (fig. 1, page 3)
!
WARNING!
Never pour fuel through the burner openings.
Do not fill near an open fire or glow.
Overfilling, spilt alcohol and hot objects can cause severe burns.
➤ Ensure the heater is cooled down to room temperature.
➤ Take off the top cover (1).
➤ Release the burner (4) from outer container (9) by pressing lock spring (10).
➤ Lift the grid (3).
✓ Canister (8), burner (4) and grid (3) are lifted as one unit from the outer
container (9).
➤ Release the canister (8) from the burner (4) by pressing the spring (6).
➤ Check canister opening ensuring there's neither fire nor glow.
➤ Hold the canister (8) tilted down (fig. 2, page 3).
EN
Intended use
9